Dual Phase (DP) Steel: Mechanical Testing Data

Dual Phase (DP) Steel

Stress-Strain Data

Tensile Test Results for three DP steels using 2% tapered tensile specimens ^[1]

Uniaxial tensile test (experiment) result along with simulated microstresses of ferrite and martensite phases and the macrostress of DP 980. ^[2]

Room temperature stress–strain response (spotted) of three DP steels deformed isothermally in tension at 10^-3/s, experiments vs. Work Hardening constitutive model. ^[3]

Results of uniaxial tensile tests with loading–unloading cycles conducted at three nominal strain rates (10^-2/s, 10^-3/s, 10^-4/s). ^[4]

Uniaxial tensile test result for DP 980 steel at a strain rate of 10^-4/s. ^[5]

Monotonic and reverse compression–tension (C–T) test experimental curves for DP 590 that illustrate the three characteristic regions of reverse hardening: Bauschinger effect, rapid transient strain hardening and ‘‘permanent’’ softening ^[6]

Stress–strain behavior of constituent phases in steel DP 980 in comparison to experimental results (dotted) ^[7]

Uniaxial tension tests were conducted for seven steels in rolling direction at a nominal strain rate of ~3x10^-3 using standard ASTM E8 tensile specimens (gage region 50.8 mmin length and 12.7 mmin width). ^[8]

Fatigue Life Data

DP 590

Strain Life Curve ^[9]

DP 690

Strain Life Curve ^[9]

DP 965

Strain Life Curve ^[9]

References

↑ Ji Hyun Sung, Ji Hoon Kim, R.H. Wagoner, A plastic constitutive equation incorporating strain, strain-rate, and temperature, International Journal of Plasticity, Volume 26, Issue 12, December 2010, Pages 1746-1771, ISSN 0749-6419, http://dx.doi.org/10.1016/j.ijplas.2010.02.005.
↑ X. Sun, K.S. Choi, W.N. Liu, M.A. Khaleel, Predicting failure modes and ductility of dual phase steels using plastic strain localization, International Journal of Plasticity, Volume 25, Issue 10, October 2009, Pages 1888-1909, ISSN 0749-6419, http://dx.doi.org/10.1016/j.ijplas.2008.12.012.
↑ Ji Hoon Kim, Ji Hyun Sung, Kun Piao, R.H. Wagoner, The shear fracture of dual-phase steel, International Journal of Plasticity, Volume 27, Issue 10, October 2011, Pages 1658-1676, ISSN 0749-6419, http://dx.doi.org/10.1016/j.ijplas.2011.02.009
↑ Li Sun, R.H. Wagoner, Complex unloading behavior: Nature of the deformation and its consistent constitutive representation, International Journal of Plasticity, Volume 27, Issue 7, July 2011, Pages 1126-1144, ISSN 0749-6419, http://dx.doi.org/10.1016/j.ijplas.2010.12.003.
↑ Jiming Zhou, Arun M. Gokhale, Ashok Gurumurthy, Shrikant P. Bhat, Realistic microstructural RVE-based simulations of stress–strain behavior of a dual-phase steel having high martensite volume fraction, Materials Science and Engineering: A, Volume 630, 10 April 2015, Pages 107-115, ISSN 0921-5093, http://dx.doi.org/10.1016/j.msea.2015.02.017.
↑ Li Sun, R.H. Wagoner, Proportional and non-proportional hardening behavior of dual-phase steels, International Journal of Plasticity, Volume 45, June 2013, Pages 174-187, ISSN 0749-6419, http://dx.doi.org/10.1016/j.ijplas.2013.01.018.
↑ N. Jia, Z.H. Cong, X. Sun, S. Cheng, Z.H. Nie, Y. Ren, P.K. Liaw, Y.D. Wang, An in situ high-energy X-ray diffraction study of micromechanical behavior of multiple phases in advanced high-strength steels, Acta Materialia, Volume 57, Issue 13, August 2009, Pages 3965-3977, ISSN 1359-6454, http://dx.doi.org/10.1016/j.actamat.2009.05.002.
↑ H. Lim, M.G. Lee, J.H. Sung, J.H. Kim, R.H. Wagoner, Time-dependent springback of advanced high strength steels, International Journal of Plasticity, Volume 29, February 2012, Pages 42-59, ISSN 0749-6419, http://dx.doi.org/10.1016/j.ijplas.2011.07.008.
↑ ^9.0 ^9.1 ^9.2 ArcelorMittal http://automotive.arcelormittal.com/repository/Automotive_Product%20offer/DualPhaseSteels.pdf

[0] Ji Hyun Sung, Ji Hoon Kim, R.H. Wagoner, A plastic constitutive equation incorporating strain, strain-rate, and temperature, International Journal of Plasticity, Volume 26, Issue 12, December 2010, Pages 1746-1771, ISSN 0749-6419, http://dx.doi.org/10.1016/j.ijplas.2010.02.005.

[1] X. Sun, K.S. Choi, W.N. Liu, M.A. Khaleel, Predicting failure modes and ductility of dual phase steels using plastic strain localization, International Journal of Plasticity, Volume 25, Issue 10, October 2009, Pages 1888-1909, ISSN 0749-6419, http://dx.doi.org/10.1016/j.ijplas.2008.12.012.

[2] Ji Hoon Kim, Ji Hyun Sung, Kun Piao, R.H. Wagoner, The shear fracture of dual-phase steel, International Journal of Plasticity, Volume 27, Issue 10, October 2011, Pages 1658-1676, ISSN 0749-6419, http://dx.doi.org/10.1016/j.ijplas.2011.02.009

[3] Li Sun, R.H. Wagoner, Complex unloading behavior: Nature of the deformation and its consistent constitutive representation, International Journal of Plasticity, Volume 27, Issue 7, July 2011, Pages 1126-1144, ISSN 0749-6419, http://dx.doi.org/10.1016/j.ijplas.2010.12.003.

[4] Jiming Zhou, Arun M. Gokhale, Ashok Gurumurthy, Shrikant P. Bhat, Realistic microstructural RVE-based simulations of stress–strain behavior of a dual-phase steel having high martensite volume fraction, Materials Science and Engineering: A, Volume 630, 10 April 2015, Pages 107-115, ISSN 0921-5093, http://dx.doi.org/10.1016/j.msea.2015.02.017.

[5] Li Sun, R.H. Wagoner, Proportional and non-proportional hardening behavior of dual-phase steels, International Journal of Plasticity, Volume 45, June 2013, Pages 174-187, ISSN 0749-6419, http://dx.doi.org/10.1016/j.ijplas.2013.01.018.

[6] N. Jia, Z.H. Cong, X. Sun, S. Cheng, Z.H. Nie, Y. Ren, P.K. Liaw, Y.D. Wang, An in situ high-energy X-ray diffraction study of micromechanical behavior of multiple phases in advanced high-strength steels, Acta Materialia, Volume 57, Issue 13, August 2009, Pages 3965-3977, ISSN 1359-6454, http://dx.doi.org/10.1016/j.actamat.2009.05.002.

[7] H. Lim, M.G. Lee, J.H. Sung, J.H. Kim, R.H. Wagoner, Time-dependent springback of advanced high strength steels, International Journal of Plasticity, Volume 29, February 2012, Pages 42-59, ISSN 0749-6419, http://dx.doi.org/10.1016/j.ijplas.2011.07.008.

[AM-8] 9.0 ^9.1 ^9.2 ArcelorMittal http://automotive.arcelormittal.com/repository/Automotive_Product%20offer/DualPhaseSteels.pdf

[1]

[2]

[3]

[4]

[5]

[6]

[7]

[8]

[9]

Dual Phase (DP) Steel: Mechanical Testing Data

Contents