Properties of Aluminum

(Difference between revisions)
Jump to: navigation, search
Line 73: Line 73:
[[Category: Metals]]
[[Category: Metals]]
[[Category: VASP]]
[[Category: VASP]]
[[cATEGORY: Material Models]]
[[Category: Material Models]]
[[Category: Python]]
[[Category: Electronic Scale]]

Latest revision as of 09:44, 12 April 2017

< Homework 1 Overview


[edit] Objectives

  • Calculate surface formation energy for the (111) surface in FCC aluminum
    • Perform K-Point convergence
      • Only one K-Point is needed in the direction perpendicular to the surface
      • Plot surface formation energy vs. K-Point grid
    • Perform Convergence study on the number of layers parallel to the surface
      • This can be achieved through the provided surface structure generation script
      • Only increase the number of layers parallel to surface while keeping the atomic layers parallel to the other two directions constant
      • Plot surface formation energy vs. number of layers
    • Investigate the effect of the length of the vacuum
      • Use converged K-Point grid and layer amount
      • Use the script provided to change the length of the lattice translation vector perpendicular to the surface and calculate the surface formation energy
      • PLot surface formation energy vs. length of vacuum

[edit] Preperation

[edit] Step 1

  • Obtain two INCAR files and a KPOINTS file from here and save them separately.
    • Give the two INCAR files different names such as "INCAR_Rel" and "INCAR_sta"
  • Retrieve the VASP executable and the POTCAR (specific to your group) from where it was saved for the previous section in this homework.
  • As before, collect all these files into the same directory

[edit] Step 2

  • Copy this python code and save it with the file extension ".py".

[edit] Step 3

[edit] Running the Calculation

[edit] Overview

This calculation is split into two parts

[edit] Part 1

  • Use the provided python script to generate a POSCAR file with a supercell of at least 5x5x5 atoms.
  • Retrieve the relaxation INCAR file and rename it to just "INCAR"
  • Run VASP using the provided PBS script and job file.

[edit] Part 2

  • Find the output file called "CONTCAR" from the previous part. Rename that file "POSCAR".
  • Get the static INCAR file saved previously and rename it to "INCAR"
  • With the same POTCAR and K-Points files from before run VASP.

[edit] K-Point Convergence

  • Using the BASH script from the section 1 of this homework, perform the same K-Point mesh convergence.

[edit] Vacuum Convergence

  • Create several POSCAR files using a range of vacuum lengths
  • Run VASP for each and investigate the effect, vacuum length has.

[edit] Guidelines for accurate surface energy calculation

Once the calculations have been completed, locate the OSZICAR output file. It contains data from each electronic step. Extract the final energy Esurf with the following command:

tail -n1 OSZICAR|awk '{print $5}'

Use the following formula to calculate surface formation energy

E_{surf-from} = \frac{E_{surf}-N\epsilon}{2A}

Where Esurf is the total energy of the simulation box with the surface, N is the number of atoms in the simulation box, \epsilon is the cohesive energy per atom of the bulk structure, and A is the area of the surface.

[edit] License

By using the codes provided here you accept the the Mississippi State University's license agreement. Please read the agreement carefully before usage.

Personal tools

Material Models