Category:Process Modeling

From EVOCD
Revision as of 21:41, 2 October 2019 by Harrisdaniel (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Contents

Overview

Processes

Process modeling starts with finite element or finite difference analysis on materials processing methods. In terms of ICME, the notion is to connect the inputs and outputs of each simulation so as to capture the history effect of the simulation results.

Additive Manufacturing

Casting

Metals

Channel Die Compression

An example of channel die compression using crystal plasticity for an AM30 magnesium alloy.

Extrusion

Forging

Heat Treatment

Hydroforming

Powder Metal Compaction

Powder Metallurgy

Rolling

An example of Aluminum rolling and Yield surface simulation (plane strain compression) using the VPSC polycrystal model.



Sheet Forming

Tube Making

  • Tube manufacturing simulator - An interactive application to simulate a tube manufacturing process. The underlying model attempts to predict the tube properties (yield stress, ultimate yield, elongation to failure, hardness), and to estimate the costs (such as material, labor, equipment) at each tube processing stage.


Welding

  • Friction Stir Welding
  • Resistance Spot Welding
  • GTA

Composites

ICME Research Proposal to Evaluate Multi-Scale Property Relations for Moisture Absorption of Carbon Fiber Reinforced Plastic Bicycle Wheel

References

  1. Felicelli, S., Wang, L., Pita, C., & Obaldia, E.d. (Apr 2009). A Model for Gas Microporosity in Aluminum and Magnesium Alloys. Metallurgical and Material Transactions B, 40(2), 169-181.
  2. Ma, Q., Marin, E.B., Antonyraj, A., Hammi, Y., El Kadiri, H., Wang, P.T., and Horstemeyer, M.F., "On predicting the channel die compression behavior of hcp magnesium AM30 using crystal plasticity", TMS 2011 Conference Proceedings, accepted
  3. Parkar, A.A., Bouvard, C., Horstemeyer, S.J., Marin, E.B., Wang, P.T., and Horstemeyer, M.F., "Comprehensive thermo-mechanical validation of extrusion simulation cycle for Al 1100 using HyperXtrude", TMS 2011 Conference Proceedings, accepted

Back to Materials Models Home

Pages in category "Process Modeling"

The following 2 pages are in this category, out of 2 total.

Personal tools
Namespaces

Variants
Actions
home
Materials
Material Models
Design
Resources
Projects
Education
Toolbox