MicroMegas Input files:b plan

From EVOCD
Jump to: navigation, search

b_plan

back to microMegas page

Input file for the simulations working with planes boundaries

One must define:

line 1 = the variable named longminseg gives the minimum lenght to discretize segments stopped 
         on barriers (minimum lenght->modur/longminseg)
line 2 = the total number of planes defining the closed domaine of simulation (e.g. a cubic doamine =6)
         Notice that "0" means that any closed domaine is defined.
line 3 = T means that the intial dislocations must be outside the close area defined above
         F means that the intial dislocations must be inside the close area defined above
line 4 = The total number of planes to be considered. Additional planes with respect to the definition of line 1
         correspond to internal barriers
         
from line 5 = each normal planes vector (e.g. 0 0 1) and the shifting amplitude D such that Ax + By + Cz = D

exemple (1) a periodic bicrystal
100
0
F
1
1 0 0  500

exemple (2) a finit cubic grain
100
6
F
0
1 0 0       100.
0 1 0       100.                
0 0 1       100.               
-1 0 0    -4000.     
0 -1 0    -4000.            
0 0 -1    -4000.              

> Reading start after the following line
###########################################################
100                  !  longminseg
6                    !  nbplanDom 
T                    !  InclExcl 
6                    !  NbPlanMax
1 0 0      500.      !  varplan     posplan 
-1 0 0    -3132.     
0 1 0      500.                
0 -1 0    -3516.            
0 0 1      500.               
0 0 -1    -4316.              
Personal tools
Namespaces

Variants
Actions
home
Materials
Material Models
Design
Resources
Projects
Education
Toolbox