# MicroMegas Input files:ContCu

From EVOCD

ContCu

back to microMegas page

0 SIDEJA Simulation state key: 0=New or restart with control modification; 1=simple restart 0 mode_deformation 0=strain rate.; 1=make carto; 2=run carto; 3=stress rate.; 4=creep; 5=fatigue; 6=metalofute; 7=metalofute2 14.8 echelle simulation reference scale, i.e. size of the elementary BD vectors. (unit = Burgers vectors) F Shear Applied stress is the resolved shear stress on the slip system with the highest Schmid factor (false = uniaxial stress) 4.0 Sigma0 Initial stress (MPa) 1.00D-9 DELTAT0 Elementary time step (s) 1000000 SigmaPoint Elementary stress increments (units ?) (mode_deformation=3,6,7) 20 EpsilonPoint Imposed strain rate (s-1) (mode_deformation=0,5,6,7) 1.5 RAID Apparente Young modulus (mode_deformation=0,5,6,7) 3.0D-5 EPSMAX Maximum plastic strain per cycles (mode_deformation=5) 1.D0 FSIG Sign of the loading for the first cycle (mode_deformation=5) 2 LINTEN Line tension key: 0 -> Friedel approx; 1 -> Isotropic; 2 -> Isotropic Foreman; 3 -> Anisotrpic solution F GLDEV Cross slip key:GLDEV=True means cross-slip active 0 0 1 Tensile_axis Tensile or compression uniaxial test direction (miller indices) 300. TEMPERATURE Tenperature (Kelvin) 100 Facteur_Depmax Maximum displacement tolerate for a dislocation segment (unit=BD vectors) 50 NstatControl Number of steps accounted for in the simulation control feedback procedure ((mode_deformation=0,5,6,7) 0 relax_TL Number of steps for the intial relaxation with only a line tension 0 relax_INT Number of steps for the intial relaxation with no applied loading and no contact reactions 0 relax_reac Number of steps for the intial relaxation with no applied loading 500 NSTEP Number of steps for the simulation 0.25 Ldis_act Reference mean length to force segments discretization (micron) 0.50 Ldis_nact Reference mean length to force segments discretization on inactive slip systems (micron) 20 Period Step periodicity at which the force on waiting (quasi-imobile) segments is recalculate 10 KRC Step periodicity at which the long-range contribution to the internal stress is recalculated (if Greengard method) 3.0 L_Boite Linear mean size of the domaines used in the Greengard method (micron), negative value means dynamically defined 5.0 AB_LENGTH_SEUIL Maximum length of segments neglected in the long range contribution (if Greengard method) 5 DCFJ Distance at which stress is calculated on the segments connected to a junction (unit: vector BD) 0 GB Barriers key: 0-> inactives, 1-> planes, 2->spherical, 3->regular 3D network (polycristal) 100 TauINT_LIMITE Critical stress at which the segments are considered as singular (MPa) 400 KISAUVE Writing periodicity of the simulation segment configuration and information needed to restart a computation 400 KSTATS Writing periodicity if simulation results 400 KKIM Writing periodicity of the trajectory film information 100 KPREDRAW Periodicity of the graphical interaface refresh 0 shift_rotation Key for the translation and rotation of the simulation box boundary conditions (see the file shift_rotation) -6542 iterinfo step of debbug (negative means no debbug) -2 sysinfo slip system of interest in the debbug procedure (needed in simulations with many segments)