ZE41 is a Mg casting alloy that contains Zirconium and other rare Earth metals. [1]
This wikipage gathers together some material properties about ZE41.
Stress-Strain Data
 Fig. 1. True stress-true strain curves for ZE41 alloy at various temperatures and at a constant initial strain rate of 1.3 × 10−4 s−1 [2] |
 Fig. 2. Temperature dependence of the yield stress (empty circles) and the maximum stress (full circles). [2] |
 Fig. 3. Dependence of the yield stress on initial strain rate at various temperatures. [2] |
 Fig. 4. A part of the true stress-true strain curves of ZE41 alloy deformed at 200◦C showing strains at which the stress relaxation tests were performed. [2] |
 Fig. 5. Strain dependence of the difference in the flow stress at the beginning of deformation after stress relaxation and the flow stress at the beginning of the stress relaxation. [2] |
Fatigue Life Data
 R.R. Moore Fatigue Test S-N Curve for AZ91, ZE41, EZ33 Alloys Controls (Bare-Polished only) [3] |
 R.R. Moore Fatigue Test S-N Curve for AZ91, ZE41, EZ33 Alloys Peened only [3] |
 R.R. Moore Fatigue Test S-N Curve for AZ91, ZE41, EZ33 Alloys Pickled only [3] |
 R.R. Moore Fatigue Test S-N Curve for AZ91, ZE41, EZ33 Alloys Peened and pickled [3] |
References
- ↑ http://www.azom.com/article.aspx?ArticleID=9966
- ↑ 2.0 2.1 2.2 2.3 2.4
ZUZANKA TROJANOVÁ*, PAVEL LUKÁČ, Metalic Materials vol. 43 (2005), no. 1, pp. 73 - 80
- ↑ 3.0 3.1 3.2 3.3
James J. Bethke, 1977, EFFECT OF CORROSION RESISTANT COATINGS ON THE
FATIGUE STRENGTH OF CAST MAGNESIUM ALLOYS, Air Vehicle Technology Department
NAVAL AIR DEVELOPMENT CENTER
Warminster, Pennsylvania 18974
