Inconel 600
From EVOCD
Contents |
What is Inconel 600
The Inconel 600 is a nickel-chromium based alloy also known as alloy 600 or UNS N06600. It is an oxidation and corrosion resistant alloy used in extreme environments at high temperatures and pressures. The Inconel composition is given below:
| Ni + Co | Cr | Fe | C | Mn | S | Si | Cu |
|---|---|---|---|---|---|---|---|
| 72.0 min | 14.0-17.0 | 6.0-10 | 0.15 max | 1.00 Max | 0.015 max | 0.50 max | 0.50 max |
Mechanical Properties
The mechanical properties of this alloy is given for tension and compression tests considering temperature and strain rate.
Tensile Properties
Tensile properties of the Inconel 600 alloy are given below:
Strain Rate Sensitivity
Temperature Sensitivity
Compression Properties
Compression deformation is one of the typical processes used during forming of metal parts. Thus understanding the properties of the Inconel 600 alloy is critical for the proper characterization of the properties of the final part.
Fatigue Properties
Inconel 600 fatigue under 150C.png
References
- ↑ M. R. Hill, “Mechanical Properties Test Data for Structural Materials Quarterly Progress Report for Period Ending October 31, 1976”, Oak Ridge National Laboratory, Dec. 1976. P 282.
- ↑ M. R. Hill, “Mechanical Properties Test Data for Structural Materials Quarterly Progress Report for Period Ending October 31, 1976”, Oak Ridge National Laboratory, Dec. 1976. P 277.
- ↑ 3.0 3.1 3.2 3.3 H. A. Kuhn, “Atlas of Formability-Inconel 600”, National Center for Excellence in Metalworking Technology, Feb. 1991.
- ↑ 4.0 4.1 J. Keisler. Et al., “Fatigue Strain-Life Behavior of Carbon and Low-Alloy Steels, Austenitic Stainless Steels, and Alloy 600 in LWR Environments”, Argonne National Laboratory, August 1995.
