View source for Al 7475-T7351 Stress-Strain data

==Overview==
Al 7475-T7351 is a controlled toughness alloy developed by Alcoa Laboratories for sheet and plate applications that require a combination of high strength, superior fracture toughness and resistance to fatigue crack propagation. More information on fatigue life cycle data can be found on:

*[[Al 7475-T7351 Fatigue Life cycle data]]

Al 7475-T7351 chemical decomposition is shown on Table 1.
{| border="1"
|- style="text-align: center"
|+ Table 1: Chemical Composition Limits for Al 7475-T7351 alloy <ref name="omar"> Omar L. Deel, Paul E. Ruff, and H. Mindlin, ''ENGINEERING DATA ON NEW AEROSPACE STRUCTURAL MATERIALS'', Battelle Columbus Laboratories, June 1975 </ref> (WT. %)
! width="150" |element 
!! width="150" |[weight %]
|- style="text-align: center"
| Si || max 0.10% 
|- style="text-align: center"
| Fe || max 0.12% 
|- style="text-align: center"
| Cu || 1.2-1.9% 
|- style="text-align: center"
| Mn || max 0.06% 
|- style="text-align: center"
| Mg || 1.9-2.6%
|- style="text-align: center"
| Cr || 0.18-0.25% 
|- style="text-align: center"
| Zn || 5.2-6.2%
|- style="text-align: center"
| Ti || max 0.06% 
|- style="text-align: center"
| Others, each || max 0.05%
|- style="text-align: center"
| Others, total || max 0.15%
|- style="text-align: center"
| Aluminium || remainder
|}

==Tensile stress-strain data (Fig.1 and 2)==
{|
| [[Image:Al7475-T7351_Longitudinal Tension.png|thumb|center|300px|Figure 1. Typical tensile stress-strain curves at temperature for 7475-T7351 aluminum alloy plate (longitudinal)<ref name="omar"/> ]] || [[Image:Al7475-T7351_Transverse Tension.png|thumb|center|300px|Figure 2. Typical tensile stress-strain curves at temperature for 7475-T7351 aluminum alloy plate (transverse)<ref name="omar"/> ]]
|}

==Compression stress-strain data (Fig.3 and 4)==
{|
| [[Image:Al7475-T7351_Longitudinal Compression.png|thumb|center|300px|Figure 3. Typical compressive stress-strain and tangent modulus curves at temperature for 7475-T7351 aluminum alloy plate (longitudinal)<ref name="omar"/> ]] || [[Image:Al7475-T7351_Transverse Compression.png|thumb|center|300px|Figure 4. Typical compressive stress-strain and tangent modulus curves at temperature for 7475-T7351 aluminum alloy plate (transverse)<ref name="omar"/> ]]
|}

==References==
<references/>

[[Category:Aluminum]]
[[Category:Macroscale]]
[[Category:Metals]]
[[Category: Mechanical Properties]]
[[Category:Metals]]
[[Category: