View source for 1010 Steel

==Stress-Strain Data==

==Stress-Strain Data==
===<font size = "4">1010 Steel, quasi-static tension stress-strain data </font>====
----
Quasi-static tests were performed at ambient conditions on a MTS Servo hydraulic machine equipped with an 11 kip actuator. Load was measured with a load cell calibrated over an appropriate range. A slack adapter allowed the actuator to attain test speed before applying load to the specimen. Strain was measured using back-to back strain gauges bonded on the specimen Postyield strain was measured using a lightweight mechanical extensometer. Data from the extensometer and strain gauge were averaged to compensate for bending.
<br>
[[Image:TSSASR.png]]
====Figure 1. True stress - true strain curves for Tension for 1010 Steel at a strain rates of ~1 from two tests.====
[[Image:TSSDT.png]]
====Figure 2. True stress - true strain curves for Tension for 1010 Steel at a strain rates of ~1100 at various temperatures.====

===<font size = "4">1010 Steel, compression stress-strain data </font>===
----
The material of specimens was AISI 1010. It was provided by industrial manufacturer as cold drawn cylindrical bar. The strain/stress relationship of AISI 1010 steelwas obtained by uniaxial
compression test (see Fig. 3). In the large strain region of this material (ε > 0.64), the flowstress is assumed constant.

[[Image:CSS.png]]
====Figure 3. True stress - true strain curves of AISI 1010 by uniaxial comporession test====

===<font size = "4">1010 Steel, torsion stress-strain data </font>===
----
Materials used in this study are two kinds of AISI 1010 steels (0.1 pct low-carbon steels) having a ferrite-pearlite structure. The chemical compositions are listed in Table I. They were fabricated in rods 120 mm in diameter; one was processed by converter steel making and hot rolling, while the other was processed by electric furnace steel making and hot rolling. For convenience, the former is referred to as A-Steel, and the latter B-Steel.

[[Image:TSSTS.png]]
<br>
====Figure 4. Shear stress-shear strain curves obtained from the dynamic torsional tests for the two steels====
==Fatigue Data==
[[Image:FSN.png]]
====Figure 5. Comparison of thermal-mechanical and isothermal fatigue resistance of 1010  steel based on stress amplitude====
[[Image:FSSDT.png]]
====Figure 6. Cyclic stress-strain behavior of 1010 steel under in-phase thermal –mechanical cycling====
[[Image:FSNmaxmin(a).png]]

[[Image:FSNmaxmin(b).png]]
====Figure 4. In-phase cycle (a), the magnitude of peak compressive stress was greater than magnitude of peak tensile stress. The opposite was true for the out of phase cycle (b).====

[[Category:Metals]]
[[Category:Macroscale]]
[[Category: Mechanical Properties]]