#
# Data set for DMG Model 55p-v1p1 Calibration Utility
#
model_tag= DMG

# Fields in the data set
# material - Tag for material
# source - Source of sample
# comment - Any other comment on sample
# fname - Tag for experiment
# dstype - 1=Tension 2=Compression 3=Torsion 4=Tens+Comp 5=Comp+Tens
# units - Stress units: 1=psi 2=Ksi 3=Pa  4=KPa 5=MPa 6=GPa
# Tinit - Temperature
# rate - Strain rate
# G - Shear modulus
# a - Constant to adjust shear modulus due to variation of temperature from initial
# Bulk - Bulk modulus
# b - Constant to adjust bulk modulus due to variation of temperature from initial
# Tmelt - Melt temperature (K)
# heat - Heat generation term
# Kic - Particle fracture toughness
# nv - Particle McClintock damage constant
# dn - Particle average size
# fn - Particles volume fraction
# dcs0 - Reference grain size or dendrite cell size
# dcs - Grain size or dendrite cell size of experiment sample
# r0 - Initial radius of a spherical void
# volF - Initial void volume fraction
# period - Time period (0=no model)
# e_load - Strain level for load change (dstype 4 & 5)
# incr - No. of increments (0=no model)
# angle - Bi-axial loading ratio
# excluded - Is dataset excluded? 0=no, 1=yes
# xdata - strain values
# ydata - stress values
#
material= CI.006_tension
source= default
comment= default
fname= CI.006_tension.data
dstype= 1
units= 5
Tinit= 293
rate= 0.0001
G= 51587
a= 0
Bulk= 28509
b= 0
Tmelt= 3000
heat= 0.34
Kic= 1000
nv= 0.26
dn= 0
fn= 0.001
dcs0= 30
dcs= 30
r0= 0
volF= 0
period= 4.26214
e_load= 0
incr= 200
angle= 0.51
excluded= 0

# Experimental data
experiment=
0	2.8728
0.0002	28.7282
0.0004	56.0199
0.0007	91.9301
0.0009	126.4039
0.0011	146.5136
0.0012	158.0049
0.0014	169.4962
0.0015	182.4239
0.0017	196.7879
0.002	212.5884
0.0022	221.2069
0.0024	231.2617
0.0028	244.1894
0.0031	252.8079
0.0035	261.4263
0.0039	270.0448
0.0045	278.6632
0.0053	288.7181
0.0057	293.0273
0.0062	297.3365
0.0068	303.0822
0.0073	305.955
0.0081	313.137