#
# Data set for DMG Model 55p-v1p1 Calibration Utility
#
model_tag= DMG

# Fields in the data set
# material - Tag for material
# source - Source of sample
# comment - Any other comment on sample
# fname - Tag for experiment
# dstype - 1=Tension 2=Compression 3=Torsion 4=Tens+Comp 5=Comp+Tens
# units - Stress units: 1=psi 2=Ksi 3=Pa  4=KPa 5=MPa 6=GPa
# Tinit - Temperature
# rate - Strain rate
# G - Shear modulus
# a - Constant to adjust shear modulus due to variation of temperature from initial
# Bulk - Bulk modulus
# b - Constant to adjust bulk modulus due to variation of temperature from initial
# Tmelt - Melt temperature (K)
# heat - Heat generation term
# Kic - Particle fracture toughness
# nv - Particle McClintock damage constant
# dn - Particle average size
# fn - Particles volume fraction
# dcs0 - Reference grain size or dendrite cell size
# dcs - Grain size or dendrite cell size of experiment sample
# r0 - Initial radius of a spherical void
# volF - Initial void volume fraction
# period - Time period (0=no model)
# e_load - Strain level for load change (dstype 4 & 5)
# incr - No. of increments (0=no model)
# angle - Bi-axial loading ratio
# excluded - Is dataset excluded? 0=no, 1=yes
# xdata - strain values
# ydata - stress values
#
material= CI.006_compression
source= default
comment= default
fname= CI.006_compression.data
dstype= 2
units= 5
Tinit= 293
rate= 0.0001
G= 51587
a= 0
Bulk= 28509
b= 0
Tmelt= 3000
heat= 0.34
Kic= 1000
nv= 0.26
dn= 0
fn= 0.001
dcs0= 30
dcs= 30
r0= 0
volF= 0
period= 4.26214
e_load= 0
incr= 200
angle= 0.51
excluded= 0

# Experimental data
experiment=
0	7.1878
0.0002	28.772
0.0005	67.6234
0.0008	113.672
0.0011	151.0869
0.0013	178.4243
0.0015	207.2057
0.0017	225.9244
0.0018	236.0094
0.002	248.9748
0.0022	263.3842
0.0024	276.3646
0.0027	290.7889
0.0029	303.7843
0.0032	315.3432
0.0036	326.932
0.004	337.0769
0.0045	345.8079
0.0049	353.0948
0.0053	358.9304
0.0058	364.7884
0.0063	372.0978
0.0071	380.9036
0.0077	386.7915